Stainless Steel Wire Mesh's stainless steel has good corrosion resistance, high temperature oxidation resistance, good low temperature performance and excellent mechanical properties. Therefore, it is widely used in the screening and filtration of acid and alkali environmental conditions, chemical fillers, petroleum screens and other industries. Its main purpose is to prevent corrosion and rust. The corrosion resistance of Duplex Stainless Steel Wire Mesh relies mainly on the surface passivation film. If the film is incomplete or defective, the stainless steel will still be corroded. The pickling passivation treatment is usually carried out in the project to make the corrosion resistance potential of the stainless steel more exerted.
Surface oil, rust, non-metallic dirt, low melting point metal contaminants, paint, welding slag during the forming, assembly, welding, weld inspection, such as flaw detection, pressure test and construction marking of stainless steel equipment and components With spatters, etc. These materials affect the surface quality of stainless steel equipment and components, destroy the oxide film on the surface, reduce the overall corrosion resistance and local corrosion resistance of stainless steel stencils (including pitting, crevice corrosion), and even Causes stress corrosion cracking.
Stainless steel wire mesh surface cleaning, pickling and passivation, in addition to maximizing corrosion resistance, it also prevents product contamination and aesthetics. The surface of containers made of stainless steel wire mesh and composite steel plates with anti-corrosion requirements shall be pickled and passivated. This is for the filtration used in petrochemical industry because these devices are used for direct contact with corrosive media. From the standpoint of ensuring corrosion and corrosion resistance, it is necessary to provide pickling passivation.
For other industries, such as not for corrosion protection purposes, only based on cleaning and aesthetic requirements, stainless steel materials do not require pickling passivation. However, the weld seam of the stainless steel equipment also needs to be pickled and passivated, and the stainless steel mesh passivation film is repaired to improve the rust resistance.