As a Monel Wire Mesh Manufacturer, let's take a look at the performance advantages of Monel 400 Wire Mesh and its uses.
Monel alloy, also known as nickel alloy, is an alloy made of metal, nickel, and other elements such as copper, iron, and manganese. Monel alloy has good corrosion resistance and is silvery white, which is suitable for edge wire materials.
Use of Monel:
The Monel 400 Wire Mesh is a high-strength, single-phase solid solution that is the most versatile, versatile, and comprehensive corrosion-resistant alloy. The alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas media, and excellent corrosion resistance to hot concentrated alkali liquor. It is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that stress corrosion cracking is generally not produced and the cutting performance is good. The alloy is mainly used for valve stems, pump shafts and impellers, conveyor scrapers, oil well drill rings, elastic parts, valve mats, etc.
The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives.
Acid Medium: Monel 400 Wire Mesh is corrosion resistant in sulfuric acid concentrations less than 85%. M400 is one of the few important materials that can withstand hydrofluoric acid.
Water Corrosion: In most water corrosion conditions, Monel 400 Wire Mesh is not only excellent in corrosion resistance, but also pitting corrosion, stress corrosion, etc., and the corrosion rate is less than 0.025 mm/a.
High temperature corrosion: The maximum temperature for continuous operation of Monel 400 Wire Mesh in air is generally around 600 °C. In high temperature steam, the corrosion rate is less than 0.026 mm/a.
Ammonia: Due to its high nickel content, Monel 400 Wire Mesh is resistant to corrosion under anhydrous ammonia and ammoniating conditions below 585 °C.